M-Loader - Tuner protection bypass chip
Introducing a new innovation in remapping available from More-BHP; The M-Loader.
Up until now we have been limited to programming 2009 onwards “tuner protected” vehicles by removing the ECU and connecting to it on the bench.
The M-Loader is a small circuit board which can be fitted inside TriCore ECU’s and can enable reading and writing through the OBD socket inside the car.
Even though the ECU needs to be initially removed to install the M-Loader, this new invention unleashes many possibilities for aftermarket chip tuning.
The M-Loader is not just a device it is an after sales package offered by More-BHP. Once the M-Loader has been installed into your car, we can quickly and easily return your car back to standard mapping for dealership servicing or warranty work free of charge. The M-Loader is completely invisible to dealership diagnostic systems and unlike other competitor products, never changes the original factory mapping dates or flash counters.
The M-Loader is also ideal for vehicles with a large number of hardware upgrades, such as big turbo conversions where lots of map tweaks are needed. The tweaked map can be loaded through the OBD port in seconds, whereas before the ECU would need to be removed an programmed on the bench.
- Once fitted, the ECU doesn’t need to be opened for reprogramming
- Undetectable to dealer diagnostic machines
- Factory flash counts and date of programming remain unchanged
-Free map switching at registered More-BHP dealers
-Reduces risk of ECU damage [soldering to PCB is only required once rather than every time ECU needs to be programmed].
The M-Loader is available for most cars fitted with Infineon TriCore processors. Use the product finder to see if M-Loader is available for your vehicle.
Examples
- VAG 2.0 / 3.0 TDI CR / 4.2 TDI CR
- BMW x18d / x20d / x25d / x30d / x35d / x35i
- Jaguar / Land Rover 2.2 TD4 / 3.0 TDV6 / 4.4 TDV8